1. Introduction:

GS-LS-D solar aviation obstacle light uses low-illumination, high-efficiency solar panels, with solar iron phosphate batteries as the power supply. Battery charging and discharging using advanced power management system, in the battery undervoltage, overvoltage, temperature all aspects of comprehensive protection, effectively improve the battery life.

The control circuit adopts micro-power control chip, which reduces the energy consumption of the control circuit itself. The light source adopts imported LED chip, which has the characteristics of high luminous height, low energy consumption and long life.

The shell of the product is made of aviation aluminum raw materials. The material has the characteristics of heavy and light, corrosion resistance, etc., which can reduce the weight of the lamp and help the staff to install and transport.

The lamp is made of PC material, which has the characteristics of corrosion resistance, UV resistance, impact resistance, etc.

2. Main functions and features:

The design of continuous working time for more than 15 days on rainy days is calculated according to 10 hours of working time every day.

The product has automatic light control function, and the lamp automatically starts to work in rainy days and at night.

It has standardized optical design and high photoelectric conversion efficiency.

Small use of special LED chip, conversion efficiency and life is much higher than ordinary LED.

Boxing has impact resistance, lightning protection, sun resistance, rain and snow resistance, can resist typhoons, ice and other bad weather invasion.

The internal use of replaceable solar iron phosphate battery, the service life can reach more than 3 years.

With bird protection.

No radio frequency, no electromagnetic interference.

Stable work, low cost.

3.Installation dimension drawing

4. Use caution tops

Please read the instructions carefully and use this product correctly. The solar aviation obstacle light must be installed in a sunny place to ensure that the solar lamp can work continuously. Install the luminaire on a mounting surface perpendicular to the axis of the luminaire, and the mounting surface should be flat and have sufficient mechanical strength. " If the lamp does not work in a low light environment when the lamp is used for the first time, the solar lamp can be placed in the sun for 12 hours to work normally. " If the lamp needs to be stored for a long time, the power switch should be turned off and placed in a dry place. Every 3 months, please take out the solar lamp and put it in the sun for five days to ensure the life of the battery.

If you have any other questions during use, please contact us.

5. Use:

Buildings, Bridges, iron towers, communication towers, chimneys, runways, helipads, traffic barriers, tower cranes.