1. Introduction:

GS-IS/T solar aviation obstacle light adopts advanced structural design, with 4 groups of Angle adjustable low illumination, high efficiency solar panels, with special solar battery as the power supply. Battery charging and discharging using advanced power management system, in the battery undervoltage, overvoltage, temperature all aspects of comprehensive protection, effectively improve the battery life. The control circuit adopts micro-power control chip, which reduces the power consumption of the control circuit. The light source adopts imported LED chip, which has the characteristics of high luminous height, low energy consumption and long life. The shell of the product is made of 316L stainless steel material, which has the characteristics of heavy and light, corrosion resistance, etc., which can reduce the weight of the lamp and help the staff install and transport the lamp using PC material, which has the characteristics of corrosion resistance, UV resistance, impact resistance, etc.

2. Main functions and features:

Design rainy day continuous working time of more than 15 days (calculated by 10 hours of working time per day).

The product has automatic light control function, and the lamp automatically starts working in rainy days and at night.

It has standardized optical design and high photoelectric conversion efficiency.

Lu uses a special LED chip, the conversion efficiency and life is much higher than ordinary LED

It has impact resistance, lightning protection, sun resistance, rain and snow resistance, and can resist the invasion of bad weather such as typhoon and ice.

·LED process, whose color conforms to the requirements of ILARecommendationsE-200-1.

The internal use of replaceable sealed lead-acid battery, the service life can reach more than 2 years.

Wear bird protection device.

No radio frequency, no electromagnetic interference.

Can be equipped with GPS, remote control function

3、Installation dimension drawing

4, Use precautions

Please read the instructions carefully and use this product correctly.

The solar aviation obstacle light must be installed in a sunny place to ensure that the solar lamp can work continuously.

Install the luminaire on a mounting surface perpendicular to the axis of the luminaire, and the mounting surface should be flat and have sufficient mechanical strength.

If the lamp does not work in a low light environment when the lamp is used for the first time, the solar lamp can be placed in the sun for 12 hours to work normally.

If the lamp needs to be stored for a long time, the power switch should be turned off and placed in a dry place. Every 3 months, please take out the solar lamp and put it in the sun for five days to ensure the life of the battery.

Lu in use, if you have other questions, please contact the company.

5, Use:

Buildings, airports, smoke, Bridges, iron towers, communication towers, super tall buildings.