
1. Introduction:
The GS-HD-155 beacon light adopts advanced structure design, and the control circuit adopts micro-power control chip, which reduces the power consumption of the control circuit. The light source adopts imported LED chip, which has the characteristics of high luminous brightness, low energy consumption and long life. The shell of the product is made of maritime grade special material, which has the characteristics of light weight and corrosion resistance, which can reduce the weight of the lamp and help the staff to install and transport. The lamp shade is made of PC material, which has the characteristics of corrosion resistance, UV resistance, impact resistance, etc.
2. Technical specifications:
Power supply
Name | Parameter |
Type number | GS-HD-155 |
DC12-48V、DC2.5-15V | |
Luminous colors are available | Red, yellow, green, blue, white |
Visual range | 1~12NM |
Light source lifetime | >100000Hr |
Light source | LED |
Vertical luminous Angle | >8° |
Horizontal luminous Angle | 360° |
Boundary dimension | ¢240mm×310mm |
Mounting dimension | ¢175~205mm×M16×4/3pieces |
Operating temperature | -40℃~70℃ |
Storage temperature | -40℃~70℃ |
Weight | 2.1KG |
Wind loading rating | 80米/seconds |
Level of protection | IP68 |
Daylight switch illuminance threshold | 300LUX±100LUX |
3. Main functions and features:
● The product has automatic light control function, and the lamp automatically starts working in rainy days and at night.
● Standardized optical design, high photoelectric conversion efficiency.
● Special LED chip, conversion efficiency and life is much higher than ordinary LED.
● It has impact resistance, lightning protection, sun resistance, rain and snow resistance, and can resist the invasion of severe weather such as typhoon and hail.
● Wide voltage input range, can automatically adapt to various power supply occasions.
● With bird protection device.
● No radio frequency, no electromagnetic interference.
4. Installation dimension diagram
5.Use precautions
● Please read the instructions carefully and use the product correctly.
● The solar lamp must be installed in a sunny place to ensure that the solar lamp can work continuously.
● Install the lamp on the mounting surface perpendicular to the axis of the lamp, and the mounting surface should be smooth and have sufficient mechanical strength.
● If the lamp does not work in a low light environment when the lamp is used for the first time, the solar lamp can be placed under the sun for 12 hours to work normally.
● If the lamp needs to be stored for a long time, the power switch should be turned off and placed in a dry place. Every 3 months, please take out the solar lamp and put it in the sun for five days to ensure the life of the battery.
● If you have any other questions during use, please contact us.
6. Use:
Sea lanes, rivers, lakes, mariculture areas, Bridges, buoys, shore signs, fixed lamp piles, lighthouses, oil fields, derrick.
7. Installation site
8. Warranty after-sales
The product is guaranteed for two years from the date of sale, and the warranty is five years. The first two years free of maintenance costs, material costs, round-trip freight (only domestic), if necessary, free replacement of new products. The third to the fifth year is free of maintenance fees, and the user needs to bear the cost of replacement parts and freight in the maintenance, and the charging standard is implemented according to the company's regulations. However, one of the following circumstances is not eligible for full coverage:
1, artificial damage and force majeure caused by lamp damage.
2, not according to the product manual installation and use.
3, abnormal installation and use.
4, without the consent of our company to disassemble products or repair products.
5. Cannot provide proof that the bill was purchased through normal channels.
6, exceed the full insurance period.
GS-HD-155 1-12 nautical mile beacon light
The GS-HD-155 beacon light adopts advanced structure design, and the control circuit adopts micro-power control chip, which reduces the power consumption of the control circuit. The light source adopt
扫描二维码分享到微信