1. Introduction:

GS-OC/Z air barrier light controller enclosure is made of SUS304 stainless steel material and excellent waterproof structure design; Internal control circuit with surge protection device, strong impact resistance can be applied to harsh working environment; The controller is equipped with external light control probe, which automatically controls the synchronous flash and light intensity level of the luminaire in three states at night, dusk/dawn and day.

There is automatic synchronization function between the controllers, and a signal line can be connected between multiple controllers to realize the synchronous work function of the controlled luminaire.

The controller can be selected by the user to control the low light intensity aviation obstacle light, medium light intensity A-type aviation obstacle light, medium light intensity B-type aviation obstacle light, high light intensity aviation obstacle light, aviation obstacle light two-color light, main and secondary aviation obstacle light.

2. Technical specifications:

3.Installation size chart

4.use precautions

● It is forbidden to use AC or DC power supply other than rated voltage;

● Power line and monitoring line must be connected correctly according to the color before power, otherwise it will cause damage to the lamp;

● Do not short circuit the output port of the controller to avoid damage to the controller;

● The load power should not exceed the range specified in the instruction manual, otherwise it will cause fuse blowout or damage to the control module;

● The installation personnel must close the controller safety lock after the completion of the operation, otherwise it will cause water inside the controller or personal safety will be affected;

● Non-professionals do not repair the controller to avoid expanding the fault and causing life damage;

5. Use:

Buildings, airports, chimneys, Bridges, iron towers, power towers, communication towers, super tall buildings.