1. Introduction:

GS-OC/E aviation obstacle light controller internal control circuit with surge protection device, strong impact resistance can be applied to harsh working environment; The controller is equipped with external light control probe, which automatically controls the synchronous flash and light intensity level of the luminaire in three states at night, dusk/dawn and day.

The controller can control up to 300 lamps synchronously.

2. Main functions and features:

● Can control the supporting high light intensity, medium light intensity, low light intensity series lamps.

● Stable operation, strong anti-interference ability, anti-vibration.

● Automatic conversion of light intensity can be realized according to the ambient brightness.

● Adjustable mounting hole design, easy to install.

● With surge protection device.

● External light-controlled induction probe function.

3. Installation dimension diagram

4, use precautions

● It is forbidden to use AC or DC power supply other than rated voltage;

● Power line and monitoring line must be connected correctly according to the color before power, otherwise it will cause damage to the lamp;

● Do not short circuit the output port of the controller to avoid damage to the controller;

● The load power should not exceed the range specified in the instruction manual, otherwise it will cause fuse blowout or damage to the control module;

● The installation personnel must close the controller safety lock after the completion of the operation, otherwise it will cause water inside the controller or personal safety will be affected;

● Non-professionals do not repair the controller to avoid expanding the fault and causing life damage;

5. Use:

Buildings, airports, chimneys, Bridges, iron towers, power towers, communication towers, super tall buildings.