NCP is a network management module specially designed for OTNS8600 series products by Guangzhou Sintai Communication Co., Ltd. Its main function is to provide the interface between equipment and network management system. With the NS2000 network management system of OTNS8600 series, NCP completes the single card management, various maintenances and management signal transmission of network element, and realizes the real-time monitoring, maintenance and management of equipment element and the whole synchronous equipment network. It provides a good solution for equipment monitoring.
Product Diagram
Product Feature
l High-speed ARM processor is used to provide powerful data processing capability. It can collect the status information, alarm events and performance parameters of each single card’s function module, and transform, process and store them. Meanwhile, control and management information is transmitted to other functional modules of the equipment.
l Provide a Console interface to support simulation terminal operation
l Provide two RJ45 Ethernet interfaces to support IP-based graphical SNMP network management
l Provide 3 SFP interfaces to support in-band management of equipment, realize the processing of 3 optical monitoring channels, and complete the receiving and sending of optical signals of optical monitoring channel at each station.
l The management module is hot swappable and does not affect the normal operation of current service after failure.
Product Specification
Function | Description |
Local management serial port | Support a Micro-USB local management serial port |
Remote management Ethernet port | Supports two RJ45 Ethernet interfaces, interface rate 10/100/1000M adaptive |
OSC optical monitoring port | Supports three pluggable optical SFP ports with LC interface |
Network management method | Support CLI, Telnet, SNMP, Web and other network management methods |
Exchange function | Support IP communication between devices to realize integrated management |
Protection function | Plug out or failure of network management card will not affect existing service |
Maintenance function | Support local or remote software online upgrade |
Reset function | Support hardware reset of local NCP card by operating key |
Initialization function | Support initialization of local NCP card hardware by operating key |
working temperature | -10℃~+60℃ |
Working humidity | 5%~95% |
Number of occupied slots | Support OTNS8600 full range chassis, occupying 1 slot |
Maximum power consumption | 5W |
MTBF | ＞100000 hours |
NCP: Network Control Management Card
NCP: Network Control Management Card
扫描二维码分享到微信
